Call Forwarding
Codes and instructions
(Call Forwarding - detailed information about the service.)
An explanation of the following terms can be found at the bottom of this page.
When you don't want to answer a call - code 61
Activate: Type the following code without spaces: * * 61 * telephone_number **time # or * * 61 * telephone number*service number**time # then press ENTER (the call button)
Cancel:
Type the following code without spaces: #61# then press ENTER
Re-activate:
Type the following code without spaces: *61# then press ENTER
Deactivate:
Type the following code without spaces: # # 61 # then press ENTER
Status check:
Type the following code without spaces: * # 61 # then press ENTER
When you are don't have a signal or your phone is switched off - code 62
Activate:
Type the following code without spaces: * * 62 * telephone_number # or * * 62* telephone number*service number# then press ENTER (the call button)
Cancel:
Type the following code without spaces: #62# then press ENTER
Re-activate:
Type the following code without spaces: *62# then press ENTER
Deactivate:
Type the following code without spaces: # # 62 # then press ENTER
Status check:
Type the following code without spaces: * # 62 # then press ENTER
To forward all incoming calls - code 21
Your telephone will not ring at all…
Activate:
Type the following code without spaces: * * 21 * telephone number # or * * 21 * telephone number*service number # then press ENTER (the call button)
Cancel:
Type the following code without spaces: #21# then press ENTER
Re-activate:
Type the following code without spaces: *21# then press ENTER
Deactivate:
Type the following code without spaces: # # 21 # then press ENTER
Status check:
Type the following code without spaces: * # 21 # then press ENTER
When your line is engaged - code 67
Activate:
Type the following code without spaces: * * 67 * telephone number # or * * 67 * telephone number*service number # then press ENTER (the call button)
Cancel:
Type the following code without spaces: #67# then press ENTER
Re-activate:
Type the following code without spaces: *67# then press ENTER
Deactivate:
Type the following code without spaces: # # 67 # then press ENTER
Status check:
Type the following code without spaces: * # 67 # then press ENTER
To terminate all types of call forwarding
Type the following code without spaces: # # 002 # then press ENTER (the call button)
Explanation of terms
Activate - This sets up the call forwarding service and allows you to enter the target phone number to which the call will be transferred.
Cancel - This temporarily disconnects call forwarding.
Re-activate - This reactivates the service (you do not need to re-enter the telephone number).
Deactivate - If you deactivate call forwarding, you will need to re-enter the target phone number the next time you activate the service.
Telephone number - This is the target phone number to which the call will be forwarded. It can be entered in either the national or international format. Calls can be forwarded to Czech phone numbers.
Time - This specifies the period of time (in seconds) after which the call will be forwarded. The minimum time is five seconds, maximum is 30 seconds.
Service - In addition to calls, you can forward other things as well, such as faxes and data transmissions. However, you cannot forward SMS and MMS messages.
| Service numbers | |
| All services | 10 |
| Voice services | 11 |
| Data services | 12 |
| Fax services | 13 |
| Data and fax services | 25 |
Example: To forward all fax calls, type the network code **21*number*13# then press ENTER (the call button). To deactivate, type ##21#*13# then press ENTER.
Note: If you do not specify a service number, leave out the * before it. In this case, only voice calls will be forwarded.
No comments:
Post a Comment